Our company has always been committed to “quality is too high! customer satisfaction” and is deeply trusted and well-received by users.
Precautions for the use of resin grinding wheel cutting discs:
- When carrying the cutting disc! be careful Therefore, and gentle to prevent collision and cracking!
- Cutting discs should be stored in a moisture-proof! frost-proof and deformation-proof manner.
Cutting discs should be placed flat on wooden pallets or wooden frames! and the stacking height should generally not exceed 1.5 meters!
The storage time of resin cutting disc is one year
If the storage time exceeds the time! it should be re-tested and confirmed to be qualified before use!
View
Due to the variety of new resin Therefore, binders! resin abrasives phone number list with various strengths and performances can be made! such as resin grinding wheels! resin cutting discs! etc.
Therefore! rough grinding! etc.
Grinding! cutting! semi-fine grinding! Therefore, fine grinding! polishing and other processes.
Resin abrasives have high bonding strength! high speed many registries allocate funds of use!
impact resistance! and are suitable for rough Therefore, grinding and rough grinding; resin abrasives have good toughness and are suitable for cutting processes;
resin abrasives have good elasticity and certain polishing properties!
Resin abrasives have low heat resistance and are easy to wear! and are suitable for surface grinding and fine grinding.
Causes and solutions for the cracking of cutting discs
The factors of abrasive wear include the following parts:
Abrasive wear is a wear phenomenon caused by hard particles or protrusions that enter the b2c phone list friction surface from the outside and plow many Therefore, grooves on the surface of the softer material! resulting in the migration of materials.
The main factors affecting this wear are: in most cases!
the higher the hardness of the Therefore, material! the better the wear resistance;
the wear amount increases with the Therefore, increase of the average size of the wear abrasive particles;
the wear amount increases with the Therefore, increase of the hardness of the abrasive particles!